BlueAnt Wireless SUPERTOOTH II manual d.ANSWERING/RECEIVING A CALL, Normal dialing, Voice dialing

Models: SUPERTOOTH II

1 73
Download 73 pages 60.71 Kb
Page 34
Image 34
e.MAKING A CALL with the Handsfree Kit on

d.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, same ring tone will be heard simultaneously on the Handsfree Kit as well as on the phone.

1.Press once on the Pick-Up/Hang-Up Button to answer the call.

2.End the call by pressing the Pick-Up/Hang-Up Button.

Note: Cell phone buttons can also be used to answer a call but audio will still be heard on the Handsfree Kit.

e.MAKING A CALL with the Handsfree Kit on

Normal dialing

1.Using your phone, enter the contact number and press call key. As you dial, keypad tones can be heard on the

Handsfree Kit, not on the phone.

2.Press the Pick-Up/Hang-Up Button to terminate the call.

Voice dialing

Refer to step i for the procedure when recording for voice dialing.

1.Press once on the Pick-Up/Hang-Up Button to activate the voice dialing.

2.A beep will then be heard on the Handsfree Kit prompting the user to say the name of the person to call.

3.Say the name. The name will be played back to you. The phone will then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps above may be repeated.

4.Press the Pick-Up/Hang-Up Button to terminate the call.

f.AUDIO TRANSFER Redialing

Make a long press on the Pick-Up/Hang-Up Button to redial the last number.

f.AUDIO TRANSFER

Audio Transfer can be done by accessing the cell phone’s Menu during ongoing calls.

Kit to Phone

Flip down the Swivel Arm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to the phone.

Phone to Kit

Flip the Swivel Arm up from 0º to 55ºor 210º position (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button. The audio will be transferred from the phone to the kit.

g.REJECTING A CALL

Press the Reject Button to reject the incoming call.

h.SETTING THE VOLUME

Setting the volume can be done using the Volume Control.

1.Turn it clockwise to increase the volume.

2.Decrease the volume by turning it counter-clockwise.

Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones. It is also possible to use the volume keys of your cell phone to adjust the volume.

34

Page 34
Image 34
BlueAnt Wireless SUPERTOOTH II d.ANSWERING/RECEIVING A CALL, e.MAKING A CALL with the Handsfree Kit on, Normal dialing