BlueAnt Wireless SUPERTOOTH II manual NOKIA 9500, a.ACTIVATING THE BLUETOOTH, Pairing Mode

NOKIA 9500 / 9300

Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You may need to register your device to download updates.

For Nokia 9500 go to www.nokia.com.au

a.ACTIVATING THE BLUETOOTH

You must activate the Bluetooth feature of your phone to establish a Bluetooth connection between your Pocket PC device and other Bluetooth devices.

1.Select Desk…Tools…Control Panel…Connections…Bluetooth…

2.Select the Settings page…Select Bluetooth Active…Select Yes

b.PAIRING TO THE CELLULAR PHONE (not possible while charging)

1.Bring your phone to within about 20 cm from the Supertooth.

2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).

3.Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A distinctive tone will be heard and the Bluetooth Indicator LED will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree

Pairing Mode.

4.Select Desk…Tools…Control Panel…Connections…Bluetooth…

5.Select Paired Devices…Press New… then Start to search for devices

Your phone now searches for Bluetooth devices and will display them in the list.

6.Scroll to the name of the device, Supertooth, and then press Pair.

7.Enter “0000” as the Passcode and then press OK.

8.In Paired Devices select Supertooth and Press Edit.

9.Move to the Device Authorized field and select Yes.

10.In Paired Devices select Supertooth…Press Edit…Press Connect.

The Supertooth is paired with your Nokia 9500. An enabled Bluetooth icon will be seen on screen indicating that the Supertooth is linked.

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the Supertooth.

1.When answering is done on the Supertooth (that is, pressing Answer once), audio will be heard on it.

2.When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the Answer button once on the Supertooth.

3.To terminate the call, press down the Pick-Up/Hang-Up Button.

39