13Reset your T1

If you are having problems with the T1, you can reset the T1 and your phone and start again:

1.Disconnect the T1 from your phone by deleting the pairing from your phone’s Bluetooth menu.

2.Turn your phone off and back on again to clear its memory.

3.With the T1 switched on, but not connected to any phones, click all three buttons (Vol +, Vol -, and the MFB) together. Note that you must quickly press and release all three buttons at the same time (do not hold down the buttons).

The T1 will reset and go straight to pairing mode.

You will now need to pair your phone with the T1 again.

14Troubleshooting Tips

The following are some troubleshooting tips for using the T1 with specific phone models.

Phonebook Transfers

When you pair your phone the T1 will attempt to transfer the contacts from your phonebook so that it can announce the names of incoming callers.

Note: If your phone prompts you to allow a connection to the T1, you must select “YES” or “OK”.

Page 8
Image 8
BlueAnt Wireless quick start Reset your T1, Troubleshooting Tips, Phonebook Transfers