*Mobile phone with voice recognition

. Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone. To enter these, please refer to your phone’s manual

. When there is no incoming or active call, press once on the TALK button

. Wait for the audio signal sent by the mobile phone (generally a short tone).

. Speak the name of person you wish to call.

Mobile without voice recognition

. Make sure both the headset and the mobile phone are ON and in stand-by mode.

. Dial the number on the phone keypad, after approximately 2 seconds the audio connection will be established.

*This function may not be available on some phones, please refer to the trouble shooting frequent asked questions in our website: www.bluetrek.com. to find out more.

Answering a call

When the headset rings, press once on the TALK button to take the call.

Ending a call

Press once on the TALK button to end an active call.

Adjusting the volume

To increase the volume during an active call, press the “VOL+” button on the headset.

To decrease the volume during an active call, press the “VOL-“ button on the headset.

Muting the microphone

To mute the microphone during an active call

During an active call, press and hold the VOL+ button for approximately 2 seconds. A periodic tone can be heard in the speaker when the microphone is muted.

To end the mute function

When the microphone is muted quickly press the VOL+ button on the BLUETREK® X2. The periodic tone will end.

Transferring a call from BLUETREK® X2 to the mobile phone

During an active call, press the TALK button for about 2 seconds. (This function only works in the Hands-Free Profile.)

In the Headset profile, you can simply turn off your headset.

Transferring a call from the mobile phone to the BLUETREK® X2

To transfer the call back to the headset, use the menu option on your phone.

Call waiting

When you hear a call waiting alert while you are on a call, press once on the TALK button to accept the second call.

PAGE 5 / 6

Page 5
Image 5
BlueTrek X2 manual Answering a call, Ending a call, Adjusting the volume, Muting the microphone, Call waiting