6.During the installation, a dialog box appears asking for the I/O base and IRQ resource information. In order to find out which values to use, go to Start XProgramsXAdministrative Tools XWindows NT DiagnosticsXselect the “Resources” tab Xpress the “IRQ” button. Select one free IRQ from the list. Next, press the button “I/O Port” and choose an 0x20 free I/O space. Add these values into the dialog box. If at any point after the installation you want to change these values, go to the Control PanelXNetwork, select the Adapters tab, press the Properties button, and fill in the new values.(Fig 5-5).

Fig 5-5

7.Finally, when the installation has been completed, (Fig 5-6). you will need to restart your computer.

Fig 5-6

NOTE: If the card is not working properly, after a restart procedure, you

3should make sure that your system has free resources ever it may shows them as being available.

21