SideKick

Indirect Water Heater

Offering a cost-effective water heating alternative. These units use indirect water-to-water heat transfer by circulating boiler-fed hot water through a coil inside the water tank. Ideal for applications that use boilers for space heating.

Robust construction - Inner tank is precision built from high quality steel and repetitive pressure testing assures the highest quality.

Durable exterior - All steel construction with an environmentally-friendly powder coat finish providing a tough and attractive exterior.

-cobalt-enriched

porcelain enamel glass lined tank and coil are highly resistant to aggressive water. Not susceptible to damage due to the presence of chloride in the water.

Automatic controls - immersion aquastat used in all models.

Factory installed brass drain valve -

accessible, tamper-proof.

Sediment reduction inlet - on 80SK and 199SK models “swirls” incoming water to reduce sediment buildup.

Factory installed T&P relief valve - CSA

listed and ASME rated.

1-1/2” coil diameter - larger diameter results in higher recovery and less pressure drop through the coil, smooth surface on coil resists lime build up.

2” Non-CFC foam insulation - reduces standby heat loss and meets or exceeds federal and state environmental requirements.

Two magnesium anode rods - inhibit

corrosion and maximize tank life. Electrolysis attacks the anode rods, not the tank.

Factory installed dielectric nipples on boiler connections - provides

greater insulating protection.

7-Year limited warranty on residential installations

3-Year limited warranty on commercial installations

Page 1
Image 1
Bock Water heaters 199SK, 80SK warranty SideKick, Indirect Water Heater, Accessible, tamper-proof, Listed and Asme rated