![](/images/new-backgrounds/1119784/11978435x1.webp)
TM200 Service Manual
1.8Paper Sensors
The printer has 2 paper sensors as follows:
Paper roll
The sensor detects a
When the paper roll diameter becomes sufficiently small, the sensor detects a
Paper roll end sensor
This sensor detects whether paper is present or not.
When the sensor detects a
Note:
After installing new paper roll, close the printer cover; then the printer restarts printing.
Cover Open Button
When the cover open button (located to the right of the cover) is pressed, the printer cover is opened. When the cover is closed, the cover open button is latched.
Note:
Be sure to use the cover open button to open the printer cover. Do not open the cover during printing.
Do not open the cover during the autocutter is operating; otherwise the mechanism may be damaged.
Cover Open Sensor
The cover open sensor monitors the printer cover. When the sensor detects a cover open during printing, the ERROR light blinks and the printer stops printing. The printer recovers when the cover is closed.
When the sensor detects a cover open while the printer is in the standby status, the printer goes offline. The printer recovers when the cover is closed.
Note:
Whether the cover is open or not does not affect the status reported by the paper roll end sensor.
1.9Standard Accessories
Sample paper roll x 1 roll
User's Manual
Exclusive external power supply unit and power cord
Disc x 1
Communication printer cable
- 16 -