![](/images/new-backgrounds/1119784/11978421x1.webp)
TM200 Service Manual
Serial interface connection example.
Host |
| Printer |
(DTE ex. 8251) |
| |
TXD | RXD | |
DSR | DTR | |
CTS | RTS | |
RXD | TXD | |
DTR | DSR | |
FG | FG | |
SG | SG |
Note:
Set the handshaking so that the transmitted data can be received.
Transmit data to the printer after turning on the power and initializing the printer.
1.5Buttons, Switches, and Panel Lights
Power Switch
Type: | Rocker switch |
Function: | The power switch turns the power on or off. |
Note:
Turn on the power only after connecting the power supply.
Panel Button
FEED button: | If you push this button once and release it, the printer |
| feeds paper for one line based on the line spacing set by |
| ESC 2 and ESC 3. If you hold on the button, the printer |
| will feed paper continuously. |
| Paper feeding using the FEED button cannot |
| be performed when the printer cover is open. |
Note:
The ESC c 5 command enables or disables the panel button. When the command disabled the button, it will not function.
- 9 -