Epson TM200 service manual Off

				TM200 Service Manual
DIP switch 1
DIP switch	Function	ON		OFF
1-1	Print emulation	TM200(default)		EPSON Emulation
1-2	Paper near end sensor	Vertical		Horizontal(default)
1-3	Selects print density	Refer to the table as below
1-4
1-5	Cutter setting	Disable		Enable(default)
1-6	Stop bit	Fixed to OFF (1 bit)
1-7	Cutter mode	Full		Partial(default)
1-8	Reserved: do not change		Fixed to OFF
	settings

Note:

TM200 accept ESC/POS command. Dip 1-1 for different printing format, ON(TM200) for 48 characters per line, OFF(EPSON Emulation) for 42 Characters per line.

Print Density Selection

	Print Density	SW 1-3	SW 1-4
1	Low power consumption	ON	ON
	mode
2	(Normal)	OFF(default)	OFF(default)
3		ON	OFF
4	(Dark)	OFF	ON

DIP switch 2

DIP switch	Function	ON		OFF
2-1	Reserved		Reserved
2-2	Receive buffer capacity	2K bytes		96K bytes(default)
2-3	Handshaking		Fixed to OFF
2-4	Data word length	Fixed to OFF (8 bits)
2-5	Parity check	Fixed to OFF (None)
2-6	Parity selection	Even		Odd(default)
2-7	Transmission speed (See the table below)
2-8

- 11 -