Bodum 10462, 10539 manual Components AT a Glance, Initial Operation, Setting the Grinding Control

ANTIGUA

COMPONENTS AT A GLANCE

1.Lid

2.Bean container

3.Grinding control

4.Bean container release

5.Inlet cover

6.Ground coffee container

7.Time /quantity control

8.Power cord inlet

9.Cord-tidy

10.Stand by Mode - ON / OFF Button

11.Main Power - ON / OFF Switch

INITIAL OPERATION

Place the appliance on a level surface. Unreel the required length of cord.

It is important to keep the cord short. Insert the cord into the power cord inlet provided so that it is clamped and insert the plug into the socket outlet. Pack the excess cord length in the cord-tidy (fig.12). Open the lid (fig.13) of the bean container, fill the bean container with the desired quantity of coffee beans (250 g max.) (fig.14) and close the lid (fig.15). The appliance is then ready to operate.

SETTING THE GRINDING CONTROL

The main adjustment positions stated on the control for the degree of grinding are normally sufficient. The degree of grinding can be adjusted by twisting the bean container (fig.16).

= fine grinding

(e.g. for BODUM® Granos espresso coffee machine)

= medium grinding

(e.g. for BODUM® Kona filter coffee machine)

= coarse grinding

(e.g. for BODUM® French Press® coffee maker)

If the three adjustment positions do not precisely match your personal taste you can also grind your coffee by choosing any intermediate position.

If the appliance has been filled with coffee beans, the grinding control must only be operated when the motor is running.

4