ETTORE

INSTALLATION

Place the appliance on a stable flat surface which is neither hot nor near a heat source. The surface must be dry. Keep the appliance and its mains cable out of reach of children.

During use, do not place the base unit on a metal tray or a metal surface.

Ensure that the voltage indicated on the rating plate of the appliance agrees with the mains voltage in your area. Connect the appliance only to a properly earthed power point with a minimum output of 6A. (Use a residual current device (RCD) seek the advice of an electrician.) While the appliance is in use, the mains plug must be accessible in case of an emergency. To ensure continued protection against risk of electric shock, connect to prop- erly grounded outlets only

If the power point is unsuitable for accommodating the plug of your appliance, have the power point changed by a licensed electrician.

SAVE THESE INSTRUCTIONS

PARTS OF THE KETTLE

1Hinged lid

2Push button to open lid

3Water level gauge

4ON/OFF switch ON/OFF indicator light

5Base unit

6Cord retainer in base unit

7Max water level indicator

8Min water level indicator

9Scale filter

SPECIAL INSTRUCTIONS

POWER-SUPPLY CORD

A short power-supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.

Extension cords are available and may be used if care is exercised in their use.

4

Page 6
Image 6
Bodum 11175 warranty Installation, Parts of the Kettle, Special Instructions, POWER-SUPPLY Cord