Assembly is complete! Please take the following steps before using the gym:

1.Make certain all bolts are tightened securely.

2.Make certain all cables are seated into all pulley grooves. A cable rubbing

against

steel will peel the nylon coating, voiding warranty and resulting in

a need

for replacement.

3.Pre-stretch the cables. Put the Weight Selector Pin(42) in the bottom hole on the weight stack. Pull on the cables with great force, helping remove any kinks and providing any initial cable stretch.

4.Be aware the cables can loosen and slightly stretch upon initial use.

5.The cables should be adjusted as tight as possible, but no so tight as to lift the Top Plate(8) above the weight stack. Be certain to secure the jam nuts after adjustments are made.

6.For better performance, apply a household lubricant (such as silicone) to any adjustable areas and to the Guide Rods(5).

7.Enjoy many years of a Fit Lifestyle.

Thank you for purchasing the Bodycraft Galena Home Gym. If You have any questions, please call your local BodyCraft dealer or call our customer service department at 800-990-5556.

18

Page 19
Image 19
BodyCraft BCG 446 manual