STEP 3 ASSEMBLE TOP FRAME
Insert two 1" ID BUSHINGS(64) into the holes on TOP FRAME(10), then place TOP FRAME(10) down onto GUIDE RODS(5) and CENTER UPRIGHT(4).
Attach TOP FRAME(10) to CENTER UPRIGHT(4) using three 3/8" X 3/4" HEX HEAD BOLTS(84) and three 3/8" WASHERS(90).
(NOTE: Do Not tighten)
Attach PEC DEC UPRIGHT(2) and PRESS UPRIGHT(3) to TOP FRAME(10) each using two 3/8"X3" HEX HEAD BOLT(78), four 3/8" WASHER(90) and two 3/8" NYLON NUT(87).
Please check the TOP FRAME(10) is EVENLY seated on CENTER UPRIGHT(4), PRESS UPRIGHT(3) and PEC DEC UPRIGHT(2) and tighten all bolts and nuts GRADUALLY, not individually.
Attach AB PULLEY TUBE(11a) to PRESS UPRIGHT(3) using two 3/8" x 3" HEX HEAD BOLT(78), four 3/8" WASHER(90) and two 3/8" NYLON NUT(87).
| 78 | 10 | 78 |
|
|
|
|
|
|
| |
| 90 |
| 90 |
|
|
32 | 64 | 84 | 64 |
|
|
|
|
| |||
|
|
| 32 | ||
| 90 |
| 90 |
| |
|
|
|
| ||
| 84 |
| 84 |
|
|
| 90 |
| 90 |
|
|
90 | 87 |
| 87 | 90 |
|
5 | 4 | 5 |
| ||
87 | 87 |
| |||
|
|
|
| ||
2 | 34 |
| 11a | 90 | 39 |
|
| ||||
|
|
|
| 90 | 79 |
|
|
| 87 |
| |
|
|
|
|
| |
|
|
| 8790 | 3 |
|
8
