Bodyline Products International AX-4330 instruction manual For Recycling the Ni-Mh Battery

*If the shaver is used with the outer foil frame incorrectly set to the body, this will typically produce a poor shave and unusual sound.

* Do not remove the outer foil from the outer foil frame.

4. Before cleaning the trimming blade, slide the power switch off.

Notes: After cleaning the shaver, apply shaver oil (sold separately) to the outer foil surface once every 3 uses. When the shaver has not used for a long time, be sure to clean the outer foil, inner blade and trimming blade, and apply shaver oil to the outer foil surface.

FOR RECYCLING THE Ni-Mh BATTERY

Never disassemble the shaver to remove the Ni-Mh battery except to dispose of the shaver.

The Ni-Mh battery in your shaver is recyclable. When you dispose of the shaver, please take care to remove the Ni-Mh battery and recycle it.

How to remove the Ni-Mh battery

>Turn on the power switch, and run the battery down until the inner blade stops moving. If the shaver is disassembled before the recharged electricity is depleted, it may cause a shock, catch fire and cause burns.

>Follow the procedure below to disassemble the shaver with a screw- driver.

A rear case B

screw cap

screw

side panel Ni-Mh battery

AXIS EDGE 22 ENGLISH AXIS EDGE 23 ENGLISH