adaptor into the bottom socket of the shaver.
*Before connecting the power cord plug from the AC adaptor into the bottom socket of the shaver, make sure that the socket is completely dry, to prevent any possible malfunction.
3. Connect the AC adaptor plug into the AC outlet.
* Your shaver will be fully charged in approximately 1 hour, and the |
stored power will last approximately one week if the shaver is used for 3 |
minutes daily. |
>During recharging: Remains lit.
>After full charge: Goes out.
Notes:*Before recharging the shaver, check that both the plug and the outlet are securely attached to prevent any possible malfunction.
*While the shaver is recharging, a small continuous noise may be heard or the shaver body or the AC adaptor may build up and emit some heat. This is not a malfunction.
* While the shaver is recharged, the recharge indicator LED lights up, |
indicating the recharging is in process. |
* To recharge your shaver, do not use any other power source other than |
the AC adaptor included with this shaver. |
Recharge indicator LEDs
After recharging
>After the shaver is recharged for approximately 1 hour, all the power reserve indicator LEDs and the recharge indicator LED will remain lit up, indicating that the shaver is fully charged.
power | low | |
battery | ||
switch | ||
LED | ||
| ||
| indicator |
AXIS EDGE 12 ENGLISH | AXIS EDGE 13 ENGLISH |
