Bridging Mixers
Bridging Connections
In certain applications, more than four microphones or a single AUX input is needed. In these cases a CAM2 can be connected to another CAM2 to increase the number of inputs available.The BRIDGING connectors are provided for this purpose.To combine two to four CAM2 units together, connect an RCA patch cord between either of the BRIDGING connectors on one unit to either of the BRIDGING connectors of the other unit.The 2 RCA Bridging connectors on the CAM2 are wired together in parallel to allow units to be easily “daisy chained” together. The Bridging connectors provide access to the internal mix bus of each CAM2. When bridged together, the output of any of the CAM2 units can be used as the output to other equipment because the same output signal is present on each unit’s output. However, master volume control for all of the mixers will be the MASTER control on the CAM2 whose output is being used. The MASTER control of all of the other units have no effect on system volume. See the section on operation for more information.
Note: Bridging more than four CAM2 units together may reduce the maximum system output signal level below what is necessary to drive amplifiers and recording equipment.
9
