Bogen CR100A specifications Up to six stations are preset using channels 1 to

7.Eject Button - Press this button to eject the cassette tape.

8.Cassette Tape Door - Insert a cassette tape sideways with the tape side facing toward the right.

9.Digital Display - The display indicates station frequency and other functions.

10.Band Button - Each time the BAND switch is pressed, the radio frequen- cy band will be switched in the following sequence: FM1, FM2, FM3,AM and then it will repeat the sequence.

11.Manual Tuning Button - Press the UP (+) side to tune into a higher fre- quency and press the DOWN (-) side to tune into a lower frequency. The fre- quency the unit is tuned to will be indicated by the Digital Display. The fre- quency will change continuously by keeping one of the buttons pressed down.

12.Seek Button - Automatic tuning is possible by pressing this button. Having selected the desired band, press the button to search for and tune in stations broadcasting at a higher frequency.

13.Preset Button (1,2,3,4,5,6) - It is possible to program up to six stations each on the FM1, FM2, FM3, and AM bands. Each preset switch has two func- tions, depending on how long it is pressed.

To recall a preset station, press the preset switch for less than two seconds. To put the tuned in station into memory, press the preset switch for more than two seconds.

14.P.SCAN (Auto Memory) Button - The P.SCAN switch has two func- tions, depending upon how long it is pressed.

1) Pressing the P.SCAN switch for less than two seconds, the radio will auto- matically tune to the next preset channel, pause for five seconds, and repeat. This process will continue until the P.SCAN button is pressed again.

2) Pressing the P.SCAN switch for more than two seconds, the radio will auto- matically tune and store radio stations into each of the preset channels.

While pressing the P.SCAN switch, the output is muted.

By keeping the P.SCAN switch pressed for more than two seconds, the next preset channel is displayed on the channel indicator and the displayed frequency will increase.

Up to six stations are preset using channels 1 to 6.

When P.SCAN presetting is completed, the unit will tune in the station stored into channel 1.

15.MO/ST Button - Press the switch so the ST indicator lights to receive stereo programs. In case there is disturbing noise during a stereo broadcast or the broadcast is received under bad conditions, press the MO/ST button again (the ST indicator light goes out) to listen to the program in MONO.

4