Operations
RADIO OPERATION
1.Turn the unit on by turning the Volume control knob clockwise.
2.Select either FM1, FM2, FM3, or AM mode.
3.Tune to a desired station, manually or automatically, with the Manual tuning, Seek or Preset buttons.
4.Adjust the Volume and Balance controls to your liking.
5.The stereo indicator light is on the Digital display when FM stereo broadcast is being received.
6.To turn off the unit, rotate the volume control knob counterclockwise until you hear a click.
TAPE OPERATION
1.Insert a cassette into the cassette door with the tape side facing to the right.
2.Adjust the Volume and Balance controls to your liking.
3.To Fast Forward/Rewind the tape, push to lock either one of the Fast Forward
(``) or Rewind (__) buttons. To release the locking mode, lightly press the but- ton that is not locked. In the locked Fast Forward mode, should the tape reach the end, the unit will automatically start to play the other side of the tape. In the locked Rewind mode, should the tape reach the end, the unit will automatically begin playing the cassette on the side being rewound.
4.To reverse and listen to the other side of the tape, push the FF (`` ) and REW (__ ) buttons at the same time
5.To remove the tape, press Eject.
STORING STATION PRESETS
1.Tune in the station to be stored using Seek or Manual tuning.
2.Press the Preset switch (1 to 6) on the station that you want to store for at least two seconds. Meanwhile, audio output is muted for approximately two sec- onds and the corresponding channel number will be displayed.When the sound returns, the station has been properly stored.
3.Release the Preset switch when sound returns.
4.If the Preset switch is released before sound returns, the station will not be stored and the previous stored station will remain instead.
NOTE: Storing stations during cassette tape playback is not possible.
5
