Easy DesignTM Speaker
Models HS15EZ
HS15EZW
Speaker Layout
Figure 1
START | HORN SPEAKER |
|
|
Row 1
A | C |
Row 2
B
Row 3
Row 4
Figure 2
|
| PLACEMENT |
|
|
| |
|
| A | B | C |
| Volume Setting |
|
|
|
|
|
|
|
High Noise | 50 ft. | 100 ft. | 60 | ft. | 1/2 Rotation | |
| ||||||
|
|
|
|
|
| |
|
|
|
|
|
|
|
Very High Noise | 30 ft. | 65 ft. | 40 | ft. | Full Clockwise | |
|
| |||||
The layout of the speakers should be planned prior to installation. Desired mounting height, barring obstructions, is 15 to 20 feet, with the speakers angled downward toward the listening area and facing in the same direction.
Layout starts in one corner of the area (see Figure 1).The first speaker in Row 1 should be positioned a distance equivalent to (A) (see Figure 2) from the corner based on the noise level of the area. The next speaker in Row 1 should be a distance equiv- alent to (B) (see Figure 2) from the first speaker. Each additional speaker in the row should use this same spacing.
Row 2 starts a distance equivalent to (C) (see Figure 2) from Row 1, and, like Row 1, each speak- er should be a distance apart equivalent to (B).
Row 3 starts a distance equivalent to (C) from Row 2. Continue this pattern of alternating rows until the area is appropriately covered.
For areas that include high shelving or corridors, speakers should be installed so that they project down the aisles between the shelves or down through the corridors.
The spacing of the speakers can be adjusted so that the speakers are evenly spaced in a row.
NOTE: Each environment is unique.This layout plan is general in nature and may not be applicable for every installation.
Specifications subject to change without notice.
© 2000 Bogen Communications Inc. All rights reserved. Part No.
