MPS1 Speaker Cable Connections and Suspension Instructions
In addition to the Main suspension Drop Cable, a backup Safety Cable is required for proper installation. Use wire rope or other drop line rated for at least 100 lbs. to ensure a safety margin. The attachment point on the structure from which the speaker is to be anchored also must be able to handle 100 lbs.
NOTE: If using suspension cables with a cladding, be sure to strip away coating where any clamping device is being used so that bare wire cores of the cable are being clamped.
MPS1 SUSPENSION
ATTACHMENT
MAIN DROP | SAFETY |
CABLE HOLE | CABLE HOLE |
TO SPEAKER
ANCHOR
POINT
MAIN
DROP SAFETY
CABLE CABLE
MPS1
MINI PENDANT
SPEAKER
ALONG WITH THE MAIN DROP CABLE, YOU MUST ALSO USE A SAFETY CABLE WHEN SUSPENDING AN MPS1 PENDANT SPEAKER. BE SURE TO SECURE ALL RIGGING POINTS AND FOLLOW ALL THE CABLE MANUFACTURER’S MATERIAL RECOMMENDATIONS & INSTALLATION INSTRUCTIONS. FAILURE TO DO SO MAY RESULT IN PROPERTY DAMAGE, INJURY OR DEATH, AND LEGAL LIABILITY FOR YOU AND/OR YOUR COMPANY.
Attach the main drop cable to the MPS1 Main Drop Cable hole in the Suspension Attachment located on the top of the speaker. This Main Drop Cable will be the primary connection that will hold all the suspended speakerʼs weight to the anchor point.
Likewise, attach the Safety Cable to the Safety Cable hole in the Suspension Attachment. This Safety Cable is meant to be a safeguard only, so when attaching to an anchor point allow for a small amount of slack in the wire, as the Safety Cable should not bear any of the speakerʼs direct supension weight to keep the speaker hanging level.
IMPORTANT: The MPS1 Mini Pendant is not an outdoor speaker. DO NOT expose the speaker to rain or moisture. The MPS1 should be installed by qualified personnel.
