Bogen specifications PCM2000 ADDENDUM

PCM2000 ADDENDUM

The PCMCPU, PCMTIM, PCMZPM, and PCMTBM modules that comprise the PCM2000 system have been enhanced to accommodate amplifier powers of up to 250W.

A label on the top marked PCM2000-Bidentifies these modules with 250W capability.

IMPORTANT

Please make the following considerations when installing a new PCM2000-Bsystem or replacing an existing module with one marked with the PCM2000-Blabel.

1) A power supply upgrade must be made when expanding an existing sys- tem with modules that are marked with the PCM2000-Blabel. In this case replace the existing power supply with a Bogen PCMPS2 power supply (system requirements are now 12V DC @ 1.5A).

2)When replacing more than one older module with modules marked with the PCM2000-Blabel, the same power supply upgrade should be made to ensure proper system operation.

Note: Replacing an existing PCMCPU module with one marked with the PCM2000-B label does not require any power supply upgrade.

3)Do not operate a system with more than a 100W amplifier if any mod- ule in the system does not have the PCM2000-Blabel on top.

4)When installing a new system, ensure that all modules are marked with the PCM2000-Blabel.

5)PCMTBM modules that are marked with the PCM2000-Blabel will only work with PCMCPU modules that are also marked with the PCM2000-Blabel. Expanding an existing system by adding a PCMTBM may require changing the existing PCMCPU.

6)A PCM2000-BPCMCPU module will operate in an existing PCM2000 sys- tem without upgrading the existing power supply.

©2007 Bogen Communications, Inc. Specifications subject to change without notice. Part No. 54-9243-01B 0705