TB8 Installation

1.Place ceiling tile with the finished side facing up over a large trash can (provides support and saves clean up time).

2.Cut hole in the center of the ceiling tile using the raw speaker as a template.

3.Position the tile bridge on the unfinished side of the ceiling tile and bend (4) locator tabs into tile opening to prevent sliding.

4.Install Ceiling Speaker assembly using (4) 8-32 screws and the threaded holes of the tile bridge as shown. (Screws are provided with Ceiling Speaker assembly).

TB8 with RE84 Installation

1.Place ceiling tile with the finished side facing up over a large trash can (provides support and saves clean up time).

2.Cut hole in the center of the ceiling tile using the raw speaker as a template.

3.Bend (4) horseshoe tabs up on tile bridge.

4.Position the tile bridge on the unfinished side of the ceiling tile and bend (4) locator tabs into tile opening to prevent sliding.

5.Slip seismic mounting tie-off tabs (2) through RE84 tie-off tab slots until they click into place and secure customer-supplied “tie-off” wire to tab.

6.Punch out knockout in the RE84 and install Listed metallic enclosure entry fitting to knockout to accommodate plenum cable or plenum whip and feed cable or whip through the knockout.

7.Install RE84 to tile bridge by orienting horseshoe tab slots (4) over horseshoe tabs (4) of bridge.

8.With pliers, twist horseshoe tabs (4) of tile bridge 1/2 turn, securing enclosure to bridge.

9.Screw the Ceiling Speaker assembly to the RE84 using (4) 8-32 screws provided with the Ceiling Speaker assembly, sandwiching the TB8 and ceiling tile in between. The screws must go through the TB8 clearance holes as shown. (Screws anchor into the RE84).

Limited Warranty

The RE84 and TB8 are warranted to be free from defects in material or workmanship for two (2) years from the date of sale to the original purchaser. Any part of the prod- uct covered by this warranty that, with normal installation and use, becomes defec- tive will be repaired or replaced by Bogen, at our option, provided the product is shipped insured and prepaid to: Bogen Factory Service Department, 50 Spring Street, Ramsey, NJ 07446, USA. The product will be returned to you freight prepaid. This warranty does not extend to any of our products that have been subjected to abuse, misuse, improper storage, neglect, accident, improper installation or have been modified or repaired or altered in any manner whatsoever, or where the serial number or date code has been removed or defaced.

THE FOREGOING LIMITED WARRANTY IS BOGEN’S SOLE AND EXCLUSIVE WARRANTY AND THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY. BOGEN MAKES NO OTHER WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FIT- NESS FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED AND EXCLUDED TO THE MAXIMUM EXTENT ALLOWABLE BY LAW. Bogen's liability arising out of the manufacture, sale or supplying of products or their use or disposi- tion, whether based upon warranty, contract, tort or otherwise, shall be limited to the price of the product. In no event shall Bogen be liable for special, incidental or con- sequential damages (including, but not limited to, loss of profits, loss of data or loss of use damages) arising out of the manufacture, sale or supplying of products, even if Bogen has been advised of the possibility of such damages or losses. Some States do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

Products that are out of warranty will also be repaired by the Bogen Factory Service Department -- same address as above or call 201-934-8500. The parts and labor involved in these repairs are warranted for 90 days when repaired by the Bogen Factory Service Department. All shipping charges in addition to parts and labor charges will be at the owner's expense. All returns require a Return Authorization number.

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel. 201-934-8500, Fax: 201-934-9832, www.bogen.com

Page 2
Image 2
Bogen specifications TB8 Installation, TB8 with RE84 Installation, Limited Warranty

RE84 specifications

The Bogen RE84 is a highly regarded integrated amplifying solution designed to deliver exceptional performance for a wide range of audio applications. With its thoughtful engineering and user-friendly design, the RE84 has found its place in commercial venues, educational institutions, and public address systems, where clarity and reliability are paramount.

At the core of the RE84 is its robust amplification technology. This integrated amplifier features a power output of 80 watts, making it suitable for driving various speaker configurations. Its solid-state design ensures that the audio output remains consistent and reliable, even in demanding environments. The amplifier is particularly noted for its low distortion levels, which guarantee clear and precise sound reproduction.

One of the standout features of the Bogen RE84 is its versatile input options. The amplifier offers multiple input channels, including balanced mic and line inputs. This flexibility allows users to connect various audio sources effortlessly, be it microphones for public speaking or musical instruments for performances. Additionally, the RE84 is equipped with built-in mixing capabilities, enabling users to blend different audio signals seamlessly.

The RE84 is also designed with advanced tone control features. Users can fine-tune the audio output with bass and treble adjustments, ensuring optimal sound quality tailored to specific venues or personal preferences. This level of customization is particularly beneficial in environments where acoustics can vary widely, such as auditoriums or gymnasiums.

In regards to its physical design, the RE84 is built to withstand the rigors of commercial use. It features a rugged chassis that offers both durability and a professional appearance. The intuitive front panel controls simplify the operation of the amplifier, making it accessible for users of all skill levels. Furthermore, the inclusion of LED indicators for power and signal status enhances the usability of the unit.

Finally, the Bogen RE84 incorporates thermal protection and overload safeguarding technologies. These features ensure that the amplifier operates within safe parameters and prolongs its lifespan, making it a reliable choice for long-term use in any setting. With its combination of power, flexibility, and user-friendly design, the Bogen RE84 remains a preferred choice for anyone seeking a high-performance integrated amplifier.