Bogen V35 Specifications, Power Output RMS, Frequency Response, Transformer, Direct, Distortion

Specifications

Power Output (RMS):	V35:	35W	(45W Typical, @ 1 kHz/0.1%/4Ω)
	V60:	60W	(85W Typical, @ 1 kHz/0.1%/4Ω)
	V100:	100W	(140W Typical, @ 1 kHz/0.1%/4Ω)
	V150:	150W	(200W Typical, @ 1 kHz/0.1%/4Ω)
	V250:	250W	(340W Typical, @ 1 kHz/0.1%/4Ω)
Frequency Response
Transformer:	45-20 kHz; 0/-2 dB @ FRP
Direct:	20-20 kHz; 0/-1dB @ FRP
Distortion
Transformer:	0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
Direct:	0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
Direct:	0.05% THD+N, FRP @ 1 kHz
Signal-to-Noise
Fundamental:	-94 dB*
With Aux Module:	-70 dB*
With Mic Module:	-60 dB*
With Tel Module:	-70 dB*
Tone Controls
Bass Frequency:	100 Hz (+/- 10 dB minimum)
Treble Frequency:	10 kHz (+/- 10 dB minimum)
Low Cut Frequency:	125 Hz @ -6 dB/octave
Sensitivity	0.4V (at backplane connector)
Output Regulation:	2 dB or better no load to full load
Output Impedance
Transformer-Coupled:	70V, 25V, 8 ohms; balanced or unbalanced
Direct Coupled:	4 ohms
Inserts
Insert "OUT" Level:	1VRMS (@FRP)
Insert "OUT" Impedance:	50 ohms maximum
Insert "IN" Sensitivity:	1VRMS
Insert "IN" Impedance:	10k ohms minimum
Buffered Output
Output Level:	4VRMS (Max Amp Gain @ rated input sensitivity
Output Impedance:	50 ohms maximum
AC Power Receptacle:	500 watts maximum power, unswitched
AC Line Draw:	V35: 0.6A;V60: 1.3A;V100: 2A;V150: 3.5A;V250: 5.5A
Dimensions:	161/2" W x 31/2" H x 12" D (all models)
Product Weight:	V35:	24 lb.
	V60:	28 lb.
	V100:	32 lb.
	V150:	35 lb.
	V250:	40 lb.

*Referenced to FRP output level, 20-20 kHz bandwidth limited. All specifications subject to change without notice.

12