Bogen V35 Panel Descriptions, Power Vector Front Panel, Input Volume Control, Treble Control

Panel Descriptions

Power Vector Front Panel

1. Input Volume Control

Each of the 8 inputs is controlled by an independent volume control.

2. Signal / Clip Indicator

A single two-color LED located above each channel’s volume control indicates the audio activity of that channel’s input. Green indicates signal present at the input; red indicates clipping of the input signal.

3.Treble Control

Controls the amount of cut or boost of treble frequencies above 10 kHz.

4. Bass Control

Controls the amount of cut or boost of bass frequencies below 100 Hz.

5. LED Output Meter

An 11-segment LED output level meter monitors the output level of the power amplifier.

6.Average / Peak Switch

This switch determines whether the LED Output Meter registers the average or peak level of the amplifier’s output.

7. Master Volume Control

Controls overall level of mixed input signals.

8. Power Indicator

An LED indicates AC power status.

9. Power Switch

Controls AC power to the amplifier.

2