Specifications
Power Output (RMS): | V35: | 35W | (45W Typical, @ 1 kHz/0.1%/4Ω) |
| V60: | 60W | (85W Typical, @ 1 kHz/0.1%/4Ω) |
| V100: | 100W | (140W Typical, @ 1 kHz/0.1%/4Ω) |
| V150: | 150W | (200W Typical, @ 1 kHz/0.1%/4Ω) |
| V250: | 250W | (340W Typical, @ 1 kHz/0.1%/4Ω) |
Frequency Response |
|
|
|
Transformer: | |||
Direct: | |||
Distortion |
|
|
|
Transformer: | 0.5% THD+N, Maximum, | ||
Direct: | 0.1% THD+N, Maximum, | ||
Direct: | 0.05% THD+N, FRP @ 1 kHz | ||
|
|
|
|
Fundamental: |
|
| |
With Aux Module: |
|
| |
With Mic Module: |
|
| |
With Tel Module: |
|
| |
Tone Controls |
|
|
|
Bass Frequency: | 100 Hz (+/- 10 dB minimum) | ||
Treble Frequency: | 10 kHz (+/- 10 dB minimum) | ||
Low Cut Frequency: | 125 Hz @ | ||
Sensitivity | 0.4V (at backplane connector) | ||
Output Regulation: | 2 dB or better no load to full load | ||
Output Impedance |
|
|
|
| 70V, 25V, 8 ohms; balanced or unbalanced | ||
Direct Coupled: | 4 ohms |
|
|
Inserts |
|
|
|
Insert "OUT" Level: | 1VRMS (@FRP) | ||
Insert "OUT" Impedance: | 50 ohms maximum | ||
Insert "IN" Sensitivity: | 1VRMS |
|
|
Insert "IN" Impedance: | 10k ohms minimum | ||
Buffered Output |
|
|
|
Output Level: | 4VRMS (Max Amp Gain @ rated input sensitivity | ||
Output Impedance: | 50 ohms maximum | ||
AC Power Receptacle: | 500 watts maximum power, unswitched | ||
AC Line Draw: | V35: 0.6A;V60: 1.3A;V100: 2A;V150: 3.5A;V250: 5.5A | ||
Dimensions: | 161/2" W x 31/2" H x 12" D (all models) | ||
Product Weight: | V35: | 24 lb. |
|
| V60: | 28 lb. |
|
| V100: | 32 lb. |
|
| V150: | 35 lb. |
|
| V250: | 40 lb. |
|
*Referenced to FRP output level,
12