Bogen & WV250 Frequency Response, Transformer, Direct, Distortion, Signal-to-Noise, Tone Controls

		Specifications
Power Output (RMS):	WV100: 100W	(140W Typical, @1 kHz/0.1%/4Ω)
	WV150: 150W	(200W Typical, @1 kHz/0.1%/4Ω)
	WV250: 250W	(340W Typical, @1 kHz/0.1%/4Ω)
Frequency Response
Transformer:	45-20 kHz; 0/-2 dB @ FRP
Direct:	20-20 kHz; 0/-1dB @ FRP
Distortion
Transformer:	0.5% THD+N, Maximum, Full-rated bandwidth @ FRP
Direct:	0.1% THD+N, Maximum, Full-rated bandwidth @ FRP
Signal-to-Noise
Fundamental:	-94 dB*
With Aux Module:	-70 dB*
With Mic Module:	-60 dB*
With Tel Module:	-70 dB*
Tone Controls
Bass Frequency:	100 Hz (+/- 10 dB minimum)
Treble Frequency:	10 kHz (+/- 10 dB minimum)
Low Cut Frequency:	125 Hz @ -6 dB/octave
Sensitivity:	0.4V (at backplane connector)
Output Regulation:	2 dB or better no load to full load
Output Impedance
Transformer-Coupled:	70V, 25V, 8 ohms; balanced or unbalanced
Direct Coupled:	4 ohms unbalanced
Tape Out
Output Level:	4 VRMS @ FRP
Output Impedance:	50 ohms maximum
Protection:	Thermal, short-circuit, and overload (auto reset)
Line Fusing:	Resettable circuit breaker
Cooling:	Thermally controlled 3-speed fan
Power Consumption:	WV100:	2.0A @ 120V AC, 60 Hz
	WV150:	3.5A @ 120V AC, 60 Hz
	WV250:	5.5A @ 120V AC, 60 Hz
Dimensions:	WV (all models):	14-1/8" W x 21" H
	BBF:	14-1/2" W x 24-3/4" H x 3-7/8" D
	BBS:	16-1/4" W x 26-3/4" H x 3-7/8" D
	WMAD:	16-1/4" W x 26-3/4" H x 1" D
Product Weight:	WV100:	27 lb.
	WV150:	29 lb.
	WV250:	28 lb.
	BBF:	14 lb.
	BBS:	18 lb.
	WMAD:	11 lb.

*Referenced to full-rated power (FRP) output level, 20-20 kHz bandwidth limited. All specifications subject to change without notice.

11