Bogen WV100, & WV250 Installation, Package Contents, Mounting, Front Panel Input Connector

Installation

Package Contents

• Amplifier	• 2	Cables
• Instruction Manual	• Combined XLR receptacle and phone jack
• 2 Screws (M 3 x 8)	• 6	Screws (M 4 x 8)

Mounting

A surface-mount (model BBS) or flush-mount (model BBF shown below) back box as well as a WMAD door is required for installation. Refer to the instructions provided with these items for proper installation. (See Components on page 13.)

Front Panel Input Connector

If desired, a front panel mounted combination female XLR and 1/4" stereo phone jack can be installed.A white screened area is provided on the front of the amplifier, below the connector, to identify the connectors purpose and associated input number. Remove the filler cap in the upper left-hand corner of the front panel and install the combination jack as shown in the figures below. Either or both of the connector styles on the jack can be wired to any user supplied module with included cables.The labeling below the two cable connectors on the PCB identifies corresponding connectors on the combo jack.

XLR

+ WHT

G BLK

RED

T	G	R
		RED
	BLK
WHT

PHONE

Connection Identifiers

4