Bogen X300 manual Specifications, X600, X450

			Specifications
	X600		X450	X300
Power Output*	600W /Ch @ 70V		450W / Ch @ 70V	300W / Ch @ 70V
Input Sensitivity			1V
S/N Ratio (20K BW)			104dB ref. 70V, F.P.
Class of Operation			H
Product Weight	46 lbs.		44 lbs.	41 lbs.
Connector: Power	20A line cord		15A line cord	15A line cord
Input			Pluggable 3-pin terminal strips
Output		5-pin "touch-proof" Barrier Strip
Power Bandwidth			20-40kHz .5% THD
THD @ 1kHz Rated Power			less than .02%
Rated Load Impedance (per Ch.)	8 ohms		11 ohms	16 ohms
Frequency Response @ 1 watt			20-20kHz +/- 0.25dB
Output Regulation (1kHz direct)			1.5dB @ 70V
Inputs	10k-ohm electronically balanced, 3-pin pluggable terminal strip
Low-Cut Filter	60Hz, 2nd order roll-off, switch defeatable per channel
AC Input Voltage Range			95-130V AC, 60 Hz
Indicators		Status, Limit, Signal, AC Power Status (Rear)
Temperature Range			15 to 105 degrees F
Cooling		Dual Forced Air Variable Speed Fan
Physical Dimensions (W x H x D)			17" x 3.5" x 16"
Protection	RF, DC, Low-frequency, Thermal, Low-impedance, Circuit Breaker, Short Circuit
Special Features	Sequential Turn-On Circuitry (defeatable), Sleep Mode (defeatable),
	Back-Slope AC voltage regulation, Toroidal Power Transformer

* Both channels driven at nominal line voltage 120V AC, 60Hz.

11