i.Never store the machine or fuel container inside where there is an open flame, spark, or pilot light (e.g. furnace, water heater, space heater, clothes dryer, etc.)

j.To reduce a fire hazard, keep machine free of grass, leaves, or other debris build-up. Clean up oil or fuel spillage and remove any fuel soaked debris.

k.Allow machine to cool at least 5 minutes before storing.

OPERATION

1.Do not put hands and feet near rotating parts or in the feeding chambers and discharge opening. Contact with the rotating impeller can amputate fingers, hands, and feet.

2.Before starting the machine, make sure the chipper chute, feed intake, and cutting chamber are empty and free of all debris.

3.Thoroughly inspect all material to be shredded and remove any metal, rocks, bottles, cans, or other foreign objects which could cause personal injury or damage to the machine.

4.If the impeller strikes a foreign object or if your machine should start making an unusual noise or vibration, immediately shut the engine off. Allow the impeller to come to a complete stop. Disconnect the spark plug wire, ground it against the engine and perform the following steps:

a.Inspect for damage.

b.Repair or replace any damaged parts.

c.Check for any loose parts and tighten to assure continued safe operation.

5.Do not allow an accumulation of processed material to build up in the discharge area. This can prevent proper discharge and result in kickback of material through the feed opening.

6.Do not attempt to shred or chip material larger than specified on the machine or in this manual. Personal injury or machine damage could result.

7.Never attempt to unclog either the feed intake or discharge opening while the engine is running. Shut the engine off, wait until all moving parts have stopped, disconnect the spark plug wire and ground it against the engine before clearing debris.

8.Never operate without vacuum bag and discharge chute properly attached to the machine. Never empty or change vacuum bag while the engine is running. Zippered end of vacuum bag must be kept closed at all times during operation.

9.Never operate without either the inlet nozzle or optional hose attachment properly attached to the machine. Never attempt to attach or change either attachment while the engine is running.

10.Keep all guards, deflectors and safety devices in place and operating properly.

11.Keep your face and body back and to the side of the chipper chute while feeding material into the machine to avoid accidental kickback injuries.

12.Never operate this machine without good visibility or light. Always be sure of your footing and keep a firm hold on the handles.

13.Do not operate this machine on a gravel surface.

14.Do not operate this machine while under the influence of alcohol or drugs.

15.Muffler and engine become hot and can cause a burn. Do not touch.

16.Never pick up or carry machine while the engine is running.

MAINTENANCE AND STORAGE

1.Never tamper with safety devices. Check their proper operation regularly.

2.Check bolts and screws for proper tightness at frequent intervals to keep the machine in safe working condition. Also, visually inspect machine for any damage and repair, if needed.

3.Before cleaning, repairing, or inspecting, stop the engine and make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and ground it against the engine to prevent unintended starting.

4.Do not change the engine governor settings or overspeed the engine. The governor controls the maximum safe operating speed of the engine.

5.Maintain or replace safety and instruction labels, as necessary.

6.Follow this manual for safe loading, unloading, transporting, and storage of this machine.

7.Never store the machine or fuel container inside where there is an open flame, spark or pilot light such as a water heater, furnace, clothes dryer, etc.

8.Always refer to the operator’s manual for proper instructions on off-season storage.

9.If the fuel tank has to be drained, do this outdoors.

10.Observe proper disposal laws and regulations for gas, oil, etc. to protect the environment.

4

Page 3 Page 5
Page 4
Image 4
Bolens 24A-060F063 manual Operation, Maintenance and Storage
Page 3 Page 5

24A-060F063 specifications

The Bolens 24A-060F063 is a lawn tractor that embodies the perfect blend of durability, performance, and ease of use. Designed for residential users, it offers features that cater to both small and large lawn areas, making it a versatile machine for any homeowner.

At the core of the Bolens 24A-060F063 is its powerful engine. It is equipped with a robust 24 horsepower horsepower engine, delivering the necessary power to tackle various mowing tasks. The engine not only provides ample torque but also ensures smooth operation, allowing for extended mowing sessions without overheating or breakdown.

One of the standout features of this lawn tractor is its 42-inch cutting deck. This relatively compact size allows for maneuverability around obstacles in gardens and landscapes while still covering a generous area in each pass. The cutting deck also includes adjustable cutting heights, allowing users to customize their lawn’s appearance according to their preferences. With a choice of multiple height settings, homeowners can achieve that perfectly manicured look without hassle.

The Bolens 24A-060F063 incorporates several advanced technologies for enhanced user experience. The hydrostatic transmission system allows for infinite speed control, meaning that users can easily adjust their speed without the need for manual gear changes. This feature is particularly beneficial for navigating around tight corners and ensuring an even cut across varied terrain.

Furthermore, the tractor comes with an ergonomic seat designed for comfort during longer mowing sessions. The easy-to-reach controls are intuitively placed, enabling users to operate the tractor efficiently without straining. This consideration for user comfort makes it enjoyable to use, whether for routine lawn maintenance or tackling overgrown areas.

Another notable characteristic is the tractor's sturdy construction. Built with solid materials, it promises longevity and reliability, even when exposed to harsh weather conditions. The durability is complemented by the tractor's low maintenance needs, making it a convenient option for busy homeowners.

In conclusion, the Bolens 24A-060F063 is an efficient and reliable lawn tractor that combines power, advanced technology, and user-friendly features, making it an ideal choice for homeowners looking to maintain their lawns with ease. Its impressive cutting performance, comfortable design, and sturdy build ensure a satisfying mowing experience. Whether you have a small yard or a larger plot, this lawn tractor stands ready to help you achieve a lush and beautifully manicured lawn.
Top Page Image Contents