Remove the belt cover by removing five hex screws. See Figure 6-3. Then simply pull the belt off by grasping it from the bottom of the auger pulley and pulling off. Once you remove the belt from the pulleys, you can push down on the idler pulley to release the belt from under belt keeper.

To replace the belt follow these instructions and refer to Figure 6-4:

1.Push down on the Idler pulley.

2.Put belt on top of the auger pulley under belt keeper.

3.Thread belt around engine pulley.

4.Push belt over bottom of auger pulley.

5.Reinstall the belt cover removed earlier.

Engine

1.Refer to the separate engine manual for all engine maintenance procedures.

2.Check engine and snow thrower frequently for loose hardware, and tighten as needed.

Lubrication

Lubricate pivot points on the control handle and the extension spring at the end of the control cable with a light oil once every season and before storage of the snow thrower at the end of the season.

Replacing Auger Paddles

The snow thrower auger’s rubber paddles are subject to wear and should be replaced if any signs of excessive wear is present.

IMPORTANT: Do NOT allow the auger’s rubber paddles to wear to the point where portions of the metal auger itself can come in contact with the pavement. Doing so can result in serious damage to your snow thrower.

To change the rubber paddles, proceed as follows:

1.Remove the existing rubber paddles by unthreading the self-tapping screws which secure them to the auger. See Figure 6-5.

2.Secure the replacement rubber paddles to the auger using the hardware removed earlier.

Off-Season Storage

If unit is to be stored over 30 days, prepare for storage as instructed in the separate engine manual packed with your snow thrower.

•Clean snow thrower thoroughly.

•Lubricate as instructed in the Maintenance section of this manual.

•Refer to engine manual for correct engine storage instructions.

•Store the snow thrower in a clean, dry area.

•When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rustproof the equipment, especially

Idler Pulley

Belt Keeper

To remove, pull belt here

Figure 6-3









Figure 6-4

Figure 6-5

6

Adjustments

&

Maintenance

WARNING

Before servicing, repairing, or inspect- ing, disengage the control bail and stop engine. Wait until all moving parts have come to a complete stop.

IMPORTANT: Do NOT allow the auger’s rubber paddles to wear to the point where portions of the metal auger itself can come in contact with the pavement. Doing so can result in serious damage to your snow thrower.

11

Page 10 Page 12
Page 11
Image 11
Bolens 2N1, 2P5 warranty Engine, Lubrication, Replacing Auger Paddles, Idler Pulley Belt Keeper To remove, pull belt here
Page 10 Page 12

2P5, 2N1 specifications

The Bolens 2N1,2P5 is a versatile lawn care machine engineered for both homeowners and professionals seeking reliability and efficiency. This model combines a range of features designed for optimal performance in landscaping, gardening, and maintenance.

A notable characteristic of the Bolens 2N1,2P5 is its robust engine, which provides the power needed for various lawn care tasks. The engine is built with durability in mind, ensuring that it can handle challenging terrains and heavy workloads without sacrificing performance. This increased power translates into enhanced cutting capacity, enabling users to effortlessly tackle tall grass and thick weeds.

The design of the Bolens 2N1,2P5 is another key feature that sets it apart from competitors. Its ergonomic handle ensures comfort during extended use, reducing fatigue and enhancing the user experience. Adjustable height settings allow the operator to customize the cutting height to suit individual lawn styles and personal preferences. This flexibility makes it ideal for various grass types and seasonal conditions.

In terms of technology, the Bolens 2N1,2P5 boasts a dual-purpose functionality, allowing it to be used as both a mower and a mulcher. This versatility enables users to switch between cutting and mulching modes with ease, promoting greater efficiency in yard maintenance. The mulching capability not only recycles grass clippings back into the lawn, enriching the soil with nutrients, but also eliminates the need for bagging and disposal.

The machine's construction is reinforced with high-quality materials, ensuring weather resistance and longevity. This aspect is especially crucial for outdoor equipment that must endure exposure to various elements over time.

Safety features are also integrated into the design of the Bolens 2N1,2P5, including blade brakes and secure start mechanisms to protect the user during operation. These elements are designed to enhance safety without compromising on performance, making this model a reliable choice for all skill levels.

In conclusion, the Bolens 2N1,2P5 is a powerful, efficient, and user-friendly lawn care solution. With its robust engine, ergonomic design, dual-purpose functionality, and commitment to safety, it stands as an attractive option for anyone looking to maintain their outdoor space effectively.
Top Page Image Contents