Figure 5-4 - Standard Skid Shoe

Figure 5-5 - Steel Reversible

Figure 5-6 - Plastic Reversible

5

Making

Adjustments

You can also check the adjustment as follows:

1.With the snow thrower tipped forward, remove the frame cover underneath the snow thrower by removing the self-tapping screws. See Figure 6-5 on page 15.

2.With the drive control released, there must be 1/8” clearance between the friction wheel and the drive pulley in all positions of the shift lever.

3.With the drive control engaged, the friction wheel must contact the drive pulley. See Figure 6-8.

4.If adjustment is necessary, loosen the lower hex nut on the drive cable index bracket and pivot the bracket upward or downward as necessary. Refer to Figure

5-3. Tighten the lower hex nut to secure the bracket when correct adjustment is reached.

5.Reassemble the frame cover and return the unit back to its operating position.

Skid Shoes

The space between the skid shoes and the ground can be adjusted.

•For close snow removal on a smooth surface, raise skid shoes higher on the auger housing.

•Use a middle or lower position when the area to be cleared is uneven, such as a gravel driveway.

To adjust the skid shoes:

1.Loosen the four hex nuts (two on each side) and carriage bolts. Move skid shoes to desired position.

2.Make certain the entire bottom surface of skid shoe is against the ground to avoid uneven wear on the skid shoes.

3.Retighten nuts and bolts securely.

NOTE: Some models are equipped with reversible skid shoes and may be turned over to increase their lifespan. See Figure 5-6 and 5-7.

IMPORTANT

It is not recommended that you operate this snow thrower on gravel as loose gravel can be easily picked up and thrown by the auger causing personal injury or damage to the snow thrower.

If for some reason, you have to operate the snow thrower on

Auger Control

To adjust the auger control, refer to page 11.

gravel, keep the skid shoe in the highest position for maximum clearance between the ground and the shave plate.

13

Page 12 Page 14
Page 13
Image 13
Bolens 31AE6GKF500 warranty You can also check the adjustment as follows, To adjust the skid shoes
Page 12 Page 14

31AE6GKF500 specifications

The Bolens 31AE6GKF500 is a standout model in the realm of outdoor power equipment, particularly designed for homeowners looking for a reliable and efficient lawn tractor. This machine combines innovative technology with a robust construction, catering to various landscaping tasks while ensuring superior performance.

One of the most prominent features of the Bolens 31AE6GKF500 is its powerful engine. Equipped with a reliable 382 cc OHV engine, this tractor provides ample power to tackle even the most challenging terrain. The engine is designed for easy starting and fuel efficiency, making it a practical choice for homeowners. The 31AE6GKF500 also features a hydrostatic transmission, which delivers smooth and responsive shifting without the need for manual gear changes. This allows users to focus on their mowing tasks without the interruption of gear management.

The cutting deck is another significant highlight of this lawn tractor. The 31AE6GKF500 hosts a 30-inch cutting deck, designed to provide a clean and even cut. This size is particularly advantageous for homeowners with smaller lawns or those navigating tighter spaces. The deck offers multiple cutting heights, allowing users to adjust the mower to suit their lawn's specific needs. This flexibility encourages a healthier lawn by promoting better grass growth.

In addition to its cutting capabilities, the Bolens 31AE6GKF500 is designed with user comfort in mind. It features a high-back padded seat, providing support during extended mowing sessions. The ergonomically designed controls are easily accessible, ensuring that users can operate the tractor with minimal effort. Furthermore, the compact size of the tractor ensures excellent maneuverability, making it easy to navigate around flower beds, trees, and other obstacles.

Maintenance is also a breeze with the Bolens 31AE6GKF500. It is designed for easy access to engine components, ensuring that routine maintenance tasks such as oil changes and air filter replacements can be performed with minimal hassle. The durable construction further guarantees longevity, allowing this lawn tractor to withstand the rigors of regular use.

Overall, the Bolens 31AE6GKF500 stands out as an excellent choice for homeowners seeking efficiency and reliability in their lawn care equipment. Its powerful engine, innovative cutting deck, user-friendly design, and easy maintenance make it a valuable addition to any outdoor toolkit. Whether you're mowing the lawn, navigating tight spaces, or simply maintaining your yard, the Bolens 31AE6GKF500 proves to be a dependable partner in achieving a well-manicured landscape.
Top Page Image Contents