The extension cord is fastened with a cable tie to the rear of the auger housing for shipping purposes. Cut the cable tie and remove it before operating the snow thrower.

CAUTION: Prior to operating your snow thrower, refer to Auger Control Test on page 11. Read and follow all instructions carefully, and perform all adjustments to verify your snow thrower is operating safely and properly.

Shear Pin Storage (optional)

An area for convenient shear pin storage is located at the rear of the dash panel.

Drift Cutters (If Equipped)

Drift cutters should be used when operating the snow thrower in heavy drift conditions.

•On models so equipped, drift cutters and hardware are assembled to the auger housing inverted.

•Remove the carriage bolts and wingnuts securing the drift cutters to the housing.

•Reposition drift cutters so they face forward as shown in Figure 3-6. Secure with hardware previously removed, wingnuts should be fastened on the outside of the housing as shown.

If your unit is not equipped with drift cutters, you may contact Customer Support as instructed on page 2 for information regarding price and availability.

Clean-Out Tool

The clean-out tool is mounted to the rear of the auger housing and is designed to clear a clogged chute. Refer to page 9 for instructions on how to properly use it.

NOTE: This item is fastened with a cable tie to the rear of the auger housing at the factory. Cut the cable tie before operating the snow thrower.

WARNING: Never use your hands to clean snow and ice from the chute assembly or auger housing.

Lamp Wiring Harness (If equipped)

The post on the cable tie attaching the lamp wiring har- ness to the lower handle should be plugged into the hole in the lower handle. Pull the slack portion of the wiring harness through the cable tie to prevent interference with the recoil starter handle. See Figure 3-7.

Skid Shoes

Position the skid shoes based on surface conditions. Adjust upward for hard-packed snow. Adjust downward when operating on gravel or crushed rock surfaces. See “Making Adjustment” Section.

Figure 3-6

Figure 3-7

Tire Pressure

The tires are over-inflated for shipping purposes. Check the tire pressure before operating the snow thrower. Refer to the tire side wall for tire manufacturer’s recommended psi and deflate (or inflate) the tires as necessary.

NOTE: If the tire pressure is not equal in both tires, the unit may not travel in a straight path and the shave plate may wear unevenly.

3

Setting Up

Your Snow

Thrower

CAUTION

Prior to operating your snow thrower, refer to Auger Control Test on page 11. Read and follow all instructions care- fully and perform all adjustments to verify your unit is operating safely and properly.

7

Page 6 Page 8
Page 7
Image 7
Bolens 31AE6GKF500 Shear Pin Storage optional, Drift Cutters If Equipped, Clean-Out Tool, Lamp Wiring Harness If equipped
Page 6 Page 8

31AE6GKF500 specifications

The Bolens 31AE6GKF500 is a standout model in the realm of outdoor power equipment, particularly designed for homeowners looking for a reliable and efficient lawn tractor. This machine combines innovative technology with a robust construction, catering to various landscaping tasks while ensuring superior performance.

One of the most prominent features of the Bolens 31AE6GKF500 is its powerful engine. Equipped with a reliable 382 cc OHV engine, this tractor provides ample power to tackle even the most challenging terrain. The engine is designed for easy starting and fuel efficiency, making it a practical choice for homeowners. The 31AE6GKF500 also features a hydrostatic transmission, which delivers smooth and responsive shifting without the need for manual gear changes. This allows users to focus on their mowing tasks without the interruption of gear management.

The cutting deck is another significant highlight of this lawn tractor. The 31AE6GKF500 hosts a 30-inch cutting deck, designed to provide a clean and even cut. This size is particularly advantageous for homeowners with smaller lawns or those navigating tighter spaces. The deck offers multiple cutting heights, allowing users to adjust the mower to suit their lawn's specific needs. This flexibility encourages a healthier lawn by promoting better grass growth.

In addition to its cutting capabilities, the Bolens 31AE6GKF500 is designed with user comfort in mind. It features a high-back padded seat, providing support during extended mowing sessions. The ergonomically designed controls are easily accessible, ensuring that users can operate the tractor with minimal effort. Furthermore, the compact size of the tractor ensures excellent maneuverability, making it easy to navigate around flower beds, trees, and other obstacles.

Maintenance is also a breeze with the Bolens 31AE6GKF500. It is designed for easy access to engine components, ensuring that routine maintenance tasks such as oil changes and air filter replacements can be performed with minimal hassle. The durable construction further guarantees longevity, allowing this lawn tractor to withstand the rigors of regular use.

Overall, the Bolens 31AE6GKF500 stands out as an excellent choice for homeowners seeking efficiency and reliability in their lawn care equipment. Its powerful engine, innovative cutting deck, user-friendly design, and easy maintenance make it a valuable addition to any outdoor toolkit. Whether you're mowing the lawn, navigating tight spaces, or simply maintaining your yard, the Bolens 31AE6GKF500 proves to be a dependable partner in achieving a well-manicured landscape.
Top Page Image Contents