SECTION 4: KNOW YOUR LAWN MOWER

Read this operator’s manual and safety rules before operating your lawn mower. Compare the illustration in Figure 9 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

WARNING: The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.

 

Blade Control

 

Handle

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mulching

 

 

 

 

 

 

 

Plug

Recoil

 

 

 

 

 

 

 

Starter

 

Cutting Height

 

 

Adjustment

 

 

 

 

Lever

Recoil Starter

The recoil starter is attached to the right lower handle. Stand behind the unit and pull the recoil starter to start the unit. See Figure 9.

Blade Control Handle

The blade control handle is located on the upper handle of the mower. The blade control handle must be depressed in order to operate the unit. Release blade control handle to stop engine and blade.

WARNING: This blade control mechanism is a safety device. Never attempt to bypass its operations.

Cutting Height Adjustment Lever

These levers are located on each wheel and they are used to adjust the cutting height. All four levers have to be at the same relative position to ensure an uniform cut. See Figure 9.

Engine Controls

See the separate engine manual for the location and function of the controls on the engine.

Discharge

Chute

Figure 9

Stopping Engine

Release blade control handle to stop the engine and the blade.

Disconnect spark plug wire and ground it to a bolt on the engine.

WARNING: Before using your lawn mower, again refer to the Safety Section in this manual. Always be careful.

10

Page 10
Image 10
Bolens 506 manual Know Your Lawn Mower, Stopping Engine