SECTION 6: MAKING ADJUSTMENTS
Cutting Height Adjustment
WARNING: Do not at any time make any adjustments without first stopping engine and disconnecting spark plug wire.
Each wheel has a height adjustment lever which provides cutting height adjustment. When the adjustment lever is moved from one location to another the height of cut will be changed. Simply depress the lever towards wheel and move lever assembly to desired position. See Figure 10.
IMPORTANT: All wheels must be placed in the same relative position. For rough or uneven lawns, move the height adjustment lever to a higher position. This will help stop scalping of the grass.
Height Adjustment
Lever
Figure 10
Handle Height Adjustment
Your mower is shipped with the handle in the higher height position. To lower the height proceed as follows:
•Remove the starter rope from the rope guide.
•Disconnect the handle from the handle bracket assemblies by removing the wing nuts.
See Figure 11.
•Position each handle bracket assembly stud into one of the other holes in the lower handle.
•Each end of the lower handle must be placed in same relative position.
| Lower |
Wing | Handle |
| |
Nuts |
|
Handle 
Bracket
Assemblies
Figure 11
12
