Assembly

CHIP EXTRACTION

The planer comes with two chip exhaust ports, which may be used with a chip bag (Fig.2) or a shop vacuum and vacuum connector (Fig.3) to keep your work environment cleaner. The chip bag or vacuum connector may be attached to either end of the exhaust port.

Moving the port selector lever to position 1 (towards front of tool) discharges chips to the left, while position 2 (towards rear of tool) discharges chips to the right. (Fig. 1)

Included is the VAC002 adapter that will connect the hood to 1-1/4” and 1-1/2” vacuum hoses. An adapter to connect the hood to 2-1/2" hoses is also available separately.

PLANER BLADES

•There are three types of blades that can be used with the Bosch 1594 planer; standard mini tungsten carbide blades, Bosch Woodrazor micrograin mini tungsten carbide blades (standard equipment with the Bosch 1594 planer), and large HSS blades.

•While the Bosch 1594 mini tungsten carbide blades are sharper and more durable than standard mini tungsten carbide blades, the assembly and adjustment of both of Woodrazor and standard tungsten carbide blades are the same. Henceforth, all references in this manual to “mini TC blades” refer to both Woodrazor blades and standard mini tungsten carbide blades.

•To use large HSS blades with the 1594 it is necessary to purchase optional accessories.

Wear protective gloves ! WARNING when changing planer

blades. Edges are sharp and may cause injury.

REMOVING MINI TUNGSTEN

CARBIDE BLADES

Mini TC planer blades have two cutting edges, and may be reversed when one of the cutting edges becomes dull or chipped. (Fig. 6)

Before any work on the machine itself, pull the power plug.

FIG. 2

CHIP BAG

EXHAUST

PORTS

FIG. 3

VACUUM

CONNECTOR

(OPTIONAL)

Always changes both blades at the same time. Otherwise, imbalance can cause vibration and reduce the useful service life of the tool. Use only blades designated for use with this model, because other blades can cause vibration, decrease performance and may not clamp securely in blade holder. Do not attempt to sharpen or use re-sharpened any TC blades.

To remove the blades:

1.Rotate the blade drum until the clamping jaw is parallel to the planer shoe.

2.Loosen the three clamp screws by about one revolution each. (It is not necessary to remove the clamping jaw.) (Fig.4)

3.Slightly rotate the blade drum and use a piece of wood to push the blade sideways and out from under the clamping jaw. Make sure to keep your fingers away from the sharp edges of the blade. If the blade is gummed and difficult to remove, you may clean the blade and clamp with mineral spirits, lacquer thinner or alcohol. (Fig. 5)

-7-

Page 6 Page 8
Page 7
Image 7
Bosch Appliances 1594 manual Assembly, Chip Extraction, Planer Blades, Removing Mini Tungsten Carbide Blades
Page 6 Page 8

1594 specifications

Bosch Appliances has long been synonymous with quality, innovation, and reliability in the home appliance sector, and the Bosch Appliances 1594 model continues this tradition. Designed for those who seek optimal performance and cutting-edge technology, the 1594 offers a range of features that cater to modern kitchen needs.

One of the standout characteristics of the Bosch Appliances 1594 is its impressive energy efficiency. This model utilizes advanced engineering and energy-saving technologies that comply with strict energy standards, making it an eco-friendly choice for environmentally conscious consumers. Its efficient operation not only reduces energy consumption but also helps lower utility bills.

Another notable feature of the Bosch Appliances 1594 is its quiet operation. The appliance is equipped with a powerful yet remarkably silent motor, allowing users to enjoy a peaceful kitchen environment. This is particularly beneficial during late-night cooking sessions or family gatherings where conversation is key.

In terms of design, the Bosch Appliances 1594 boasts a sleek and modern aesthetic that fits seamlessly into any contemporary kitchen. The stainless steel finish not only enhances the appliance's appearance but also provides durability and easy maintenance. The well-thought-out interior layout maximizes space while allowing for easy access to all items stored within.

Technologically, the Bosch Appliances 1594 incorporates smart features that streamline everyday tasks. It often comes with a user-friendly interface, including touch controls and intuitive settings that simplify the cooking process. Many users appreciate features like multi-cooking options, allowing them to prepare various dishes simultaneously without sacrificing flavor or quality.

The Bosch 1594 model is also equipped with advanced cooking technologies, such as convection cooking, which promotes even heat distribution for perfectly cooked meals. This feature is especially beneficial for baking and roasting, ensuring consistent results every time.

Safety is another priority with the Bosch Appliances 1594. It comes with several safety features, including child locks and automatic shut-off options, giving users peace of mind while cooking.

Overall, the Bosch Appliances 1594 embodies the brand's commitment to combining functionality with stylish design. Its remarkable energy efficiency, quiet operation, smart technology, and safety features make it a standout choice for anyone looking to upgrade their culinary experience. Whether you are an amateur cook or a seasoned chef, the Bosch Appliances 1594 is engineered to meet and exceed your kitchen needs, making it a worthwhile investment for any home.
Top Page Image Contents