Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
SAFETY
Assembly
1. Insert the ends of the Table Extensions into | 2. | Thread the Miter Knob into the end of the table |
the holes in the sides of the Base. Tighten the |
| above the Miter Lock until securely in place. |
Wing Screws to hold the Extensions in place. | 3. | Slip the Dust Collection Bag over the |
The upper edge of the Extensions will be level | ||
with the surface of the saw. This provides a |
| Dust Outlet behind the saw. |
wider base for the work material to rest on.
SETUP
Mounting
Use the four bolt holes provided in the Base to mount the Miter Saw to a stable support before use. Mounting hardware not included.
Item 69683 | For technical questions, please call |
OPERATION
MAINTENANCE
Page 7
