16 en | Quick install Video Recorder 430/451 Series
F.01U.168.054 | v2.0 | 2012.05 Installation and Operation manual Bosch Security Systems
3 Quick install
To get the unit quickly operational, make the connections described below and then enter the
relevant data in the Quick install menu. The Quick install menu appears the first time the unit
is started.

3.1 Connections

Figure 3.1 Back panel connections for the Advanced model
Figure 3.2 Back panel connections for the Basic model

3.1.1 Primary connections

1. Connect the cameras to the VIDEO IN BNC connectors (automatically terminated).
2. Connect monitor A to the VGA MON A output (supporting 800x600, 1024x768, or
1280x1024).
3. Connect USB mouse to a USB port.

3.1.2 Optional connections

1. Connect monitor B to the MONB BNC connector.
2. Connect up to 4 audio signals to the AUDIO IN RCA (CINCH) inputs.
3. Connect the AUDIO OUT RCA (CINCH) output to the monitor or an audio amplifier.
4. Connect up to 4 ALARM IN inputs (via the supplied terminal blocks).
5. Connect up to 4 ALARM OUT outputs (via the supplied terminal blocks).
6. Connect a pan/tilt/zoom control unit to the RS-485 port (via the supplied screw terminal
block).
7. Connect to your network via the RJ-45 Ethernet port.
8. Connect a “Bosch RS232 to Bi-phase converter” to the RS-232 port if required.

3.1.3 Powering up

Switch on all connected equipment.
– Connect the power cord to the unit.