Video Recorder 430/451 Series Web Client Software | en 73
Bosch Security Systems Installation and Operation manual F.01U.168.054 | v2.0 | 2012.05
3. Click and hold the left and right arrows to pan.
4. Release the mouse button to stop camera movement controls.
Zoom, focus, and iris
To control the zoom, focus, and iris of PTZ cameras:
1. Select the cameo of the camera to be controlled.
2. Click and hold the left zoom button to zoom out; click and hold the right zoom
button to zoom in.
3. Click and hold the left focus button for far focus; click and hold the right focus
button for near focus.
4. Click and hold the left iris button to close the iris; click and hold the right iris
button to open the iris.
5. Release the mouse button to stop camera adjustment controls.
Pre-position
To move the active camera to a pre-position:
1. Enter a pre-position number using the keyboard.
2. Click Shot (or press enter).
Click buttons one to six for immediate positioning to one of the first six pre-positions.
To store the current position of the camera in a pre-position:
1. Position the camera.
2. Enter a pre-position number.
3. Click Set.
Aux commands
Aux commands are special commands for controlling cameras. To switch on the Aux
command:
1. Enter an Aux number.
2. Click Aux + (or press enter).
3. To switch off the Aux command, click Aux -.