Bosch Appliances 430, 451 QuadSingle

32 en | Operating instructions V ideo Recorder 430/451 Series
F.01U.168.054 | v2.0 | 2012.05 Installation and Operation manual Bosch Security Systems
5.4 Viewing pictures
The unit has two monitor outputs, A and B. The way in which these monitors display pictures
depends on how the system is configured.
5.4.1 Monitor A
Monitor A is the main monitor. It shows full-screen or quad multiscreen live, or playback
camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
is the default monitor for keyboard and mouse commands.
Changing the full-screen display on Monitor A
To control the display on monitor A with mouse control:
1. Bring up the System Control Bar.
2. Click the Monitor A button.
3. From the pop-up menu, select the display for Monitor A
– Select 1-4 for the corresponding Camera
– Select the sequence key to sequence channels 1-4
5.4.2 Monitor B
Monitor B displays full-screen or a sequence of live pictures. When an alarm or motion input is
detected, the camera picture with the Alarm/Motion indicator can be displayed on monitor B.
When multiple alarms or motion occur, camera pictures are sequenced on monitor B.
Changing the display on Monitor B
To control the display on monitor B:
1. Bring up the System Control Bar.
2. Click the Monitor B button.
3. From the pop up menu, select the display for Monitor B
– Select 1-4 for the corresponding Camera
– Select the sequence key to sequence channels 1-4
5.4.3 Viewing
The drawing shows all possible views for monitor A.
Figure 5.4 DVR supports single and quad screen viewing
Multiscreen
To view quad displays on monitor A:
– Press the quad key.
– A quad display of camera pictures appears on the active monitor.
QuadSingle
1
12
34