Bosch Appliances EX12LED installation instructions

Secure all cabling.

Installations on drywall must use a ¼” bolt and drywall butterfly type anchor or superior connection.

The EX12LED can be mounted to any flat surface. The supplied “U” shaped mounting bracket allows for tilt as well as rotation. If this mounting bracket does not suit the needs of the installation, the installer can utilize either of the two ¼-20 camera-mount holes located in the housing (see Figure 1-3on page 6). The choice of camera-type mounting brackets is left to the installer.

Step 3.1 - Mount the “U” bracket to the chosen mounting surface and attach the EX12LED with the supplied adjustment screws.

See Figure 3-1on page 10.

Step 3.2 - Tighten the EX12LED into its approximate viewing direction. Proceed to Section 4.

9