Bosch Appliances FMM462 manual Functions, Addressable Operation, Certifications and Approvals

Fire Alarm Systems FMM‑462 Series POPIT Addressable Manual Stations

FMM‑462 Series POPIT Addressable Manual Stations

www.boschsecurity.com

u Single‑gang mounting

u Latching alarm lever and key‑locked reset

u Rugged die‑cast housing with 14 gauge (1.9 mm) plated steel back and corrosion‑resistant construction

u Optional scored acrylic breakrod

The FMM‑462 Series Addressable Manual Stations allow people evacuating a building to initiate an alarm and alert others still inside. This UL-listed initiating device is compatible with the Bosch Security Systems, Inc. G Series Control Panels and the D9124 Fire Alarm Control Panel (FACP).

The POPIT module is addressed using on-board slide switches. It is then connected to a D9124 data expansion loop. The POPIT is polled by the control panel and sends reports on any opens, shorts, or ground faults on the manual station's wiring. The addressable feature allows the agencies responding to alarm or trouble conditions to go to the point that initiated the alarm or trouble report.

These low-profile manual stations are die cast with rounded edges to fit most design applications. All metallic components are painted or plated to inhibit corrosion. The FMM‑462 Series Manual Stations conform with the Americans with Disabilities Act (ADA) standards.

Functions

Addressable Operation

The POPIT connects to a two‑wire data expansion circuit from the control panel. Device address is set through slide switches on the POPIT Module, allowing programmable device identification by the control panel.

Certifications and Approvals

ADA	Complies with Americans with
	Disabilities Act ADA 4.28.3
NFPA	Complies with National Fire
	Protection Association NFPA 72

Region	Certification
USA	UL	UNIU: Boxes, Non-Coded (UL38)
	CSFM	7150-1615:0122