Bosch Appliances JP389WJ/BJ dimensions GEAppliances, Cutout Dimensions in inches, 20-5/8, 28-7/8

GEAppliances

JP389WJ/BJ – GE Select-Top™Modular Downdraft Cooktop

Cutout Dimensions (in inches)

20-5/8

25 28-7/8

Note: In some cabinets, the sides may need to be scooped or cut down 2" as shown and the corner braces removed in order to accommodate the cooktop.

Wall Installation: Wall installations require 25" countertop depth. When cabinet is flush against the wall, the fan housing can be rotated to the horizontal position for direct venting through rear wall. Make a countertop cutout that is centered in the range cabinet according to unit dimensions and installation type. Duct hole is positioned in back of cabinet for through-the-wall ducting.

Peninsula or Island Installation: For peninsula or island installation, a minimum 26" countertop depth is suggested. Blower should be in vertical position. Island or peninsula cabinets may require

*U.L. Requirement.

1-7/8"

MIN. Required*

adjustment in cutout depth and/or location within the width dimensions. Duct hole is positioned in bottom of cabinet for island or peninsula installation.

Note: A 6" minimum spacing to adjacent side wall is required

Preparing the Cabinet for Installation

5" Approx.	Rear wall venting (in inches)
for European
cabinets	9-3/8

15-3/4

2" Approx.

Specification Created 6/04

321118

Slab Installation: For peninsula or island installation and rear wall ducting, PVC duct or locally- approved piping should be used if installing under a poured concrete slab.

Installing the Ductwork: Use minimum 26-gauge galvanized or 24-gauge aluminum duct in 6" round or 3-1/4" x 10" size, or combination of both. PVC duct or locally approved piping should be used if installing under a poured concrete slab.

Downward venting (in inches)

7-9/16

9-3/8

Listed by

Underwriters

RLaboratories

For answers to your Monogram,® GE Profile™ or

GE appliance questions, visit our website at

GEAppliances.com or call

GE Answer Center® service, 800.626.2000.