1 | 2 |
|
ENGLISH 33
2.Pull the rear end of the shelf support away from the side wall and remove it.
Installing the shelf supports
Install the shelf supports in the opposite sequence.
Valid with telescopic runners: The retaining pins on the tele- scopic shelf runners must point to the front!
CAUTION!
Make sure that the longer fixing wire is in the front. The ends of the two wires must point to the rear. Incorrect installation can cause damage to the enamel.
WARNING!
Make sure that the glass panels are cool before you clean the glass door. There is a risk that the glass could break.
WARNING!
When the door glass panels are damaged or have scratches, the glass becomes weak and can break. To prevent this, you must replace them. For more instruc- tions, contact your local Service Centre.
CLEANING THE TOP OVEN GLASS PANELS
The door glass on your product can be different in type and shape from what you see in diagrams. The number of glasses can be dif- ferent.
1 |
2 |
1 |
Removing the glass:
1.Open the door.
2.Push the door trim at both sides to re- lease the clips. Refer to the picture.
3.Pull the door trim to the front to re- move it.
4.Remove the glass panels.
To install panels, do the above steps in the opposite sequence.
