Converting the installed load
The dryer has been designed for 10 or 1 amperes
If the dryer fuse (factory setting) does not correspon to the socket fuse (household fuse), complete the fo lowing steps:
1 Connect the dryer to the mains electricity (seepa+ ge40).
2 Turn | theprogramme | selectoro Off. |
|
3 Simultaneously press | and hold Start/Stopthe | and | |
Low | Heat buttons. |
|
|
4 Turn | theprogramme | selector clockwise to | •extra |
dry". |
|
|
|
5 Release both buttons. |
| ||
6 Turn | theprogramme | selector 5 positions | further |
clockwise. |
|
| |
7 Press | the Start/Stop button. |
| |
8 Press theLow Heat button (only if conversion is necessary).
iThe value set (10 or 1) will be shownDisin the play.
i If no value is shown: switch off the dryer and s again.
9 Press the Start/Stop button. The value is stored and thedisplay goes out.
10Turn theprogramme selectoro Off.
47
