Bosch Appliances MON170CL Ventilation, Front Panel Controls Figure, On -Screen Display OSD Menu

MON170CL Instruction Manual Operation

5.8Ventilation

To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered.

6.0OPERATION

6.1Front Panel Controls (Figure 1)

(i) Input	•	Press this button to display the input
		signal which is selected on the screen
	•	Press the button to exit OSD menu.
+/-	•	Press the ‘+’or‘-’button to move the
		cursor to the targeted parameter in
		the OSD main menu.

•Press the ‘+’or‘-’button to adjust the value of the selected parameterin the OSD sub-menu.

(M)MENU • Press this button to open the main OSD menu. Use this button to confirm a value for a parameter in the OSD Menu.

Power LED	•	Power on (Green)
Identification	•	Stand by (Amber)
	•	Sleeping mode (Flashing Amber)
POWER	•	Press this button to turn on or turn
		off the monitor.

6.2On -Screen Display (OSD) Menu

6.2.1CVBS/ S-VIDEO/ VGA Mode Luminance

Contrast: Adjusts the contrast value. (0-100)

Brightness: Adjusts the brightness value. (0-100)

EN 10

Color Temp. (For CVBS/S-VIDEO only)

Tint: Adjusts the tint value (NTSC only). (0-100)

Color: Adjusts the colorvalue. (0-100)

Color Temp. (For VGA only)

Selecting "User" will display the following menu:

R (Red): Adjusts the red color contrast.

G (Green): Adjusts the green color contrast.

B (Blue): Adjusts the blue color contrast.

Bosch Security Systems 6 July 2005