DINION HD | Installation en 27 |
|
|
5.9Data connector
Data 4 5 6
5 mm
(0.2 in)
1 2 3
Figure 5.9 Data connector pins
Pin Data socket
1Ground
2 RxD / Rx+
3 CTS / Rx-
4Ground
5 TxD / Tx-
6 RTS / Tx+
The data connector is used to connect the control data coming out of the camera to external devices. RS485, RS422, and RS232 is supported by this data connection.
Note:
To ensure surge and electrostatic protection, keep the cable length between the camera and external device to less than 3 meters.
Bosch Security Systems | Installation Manual |
