Bosch Appliances NDA-FMT200-DOME 5Connection, en Connection, IP200 MiniDome In-CeilingMount

Models: NDA-FMT200-DOME

1 16

Page 14

14 en Connection	IP200 MiniDome In-Ceiling Mount

After the camera is mounted, connect the network cable and the power cable.

CAUTION!

Do not connect power to the camera until all other connections are made.

CAUTION!

Installation should only be performed by qualified service personnel in accordance with the National Electrical Code or applicable local codes.

CAUTION!

All wires for installation applications must be routed through a grounded conduit.

CAUTION!

To prevent humidity problems, the camera must be installed in dry conditions, and the cable leads should be sealed once connected.

Please refer to the IP200 Minidome series User Manual for further instructions on camera connections and configuration.

AM18-Q0626 v1.0 2012.09

Installation Manual

Bosch Security Systems

Image 14

Contents

NDA-FMT200-DOME en Installation ManualIP200 MiniDome In-CeilingMount Page Table of Contents 1Safety 1.1Safety precautions2.1Parts List 2UnpackingHole 3Installation OverviewTrim ring Camera4.1Overview 4Installing a Recessed Mount4.2Installing the Recessed Mount Figure 4.2 Mounting bracket 8 en Installing a Recessed MountIP200 MiniDome In-CeilingMount IP200 MiniDome In-CeilingMount Installing a Recessed Mount enInstallation Manual Figure 4.3 Attach Recess Mount to CeilingIP200 MiniDome In-CeilingMount 10 en Installing a Recessed MountInstallation Manual Figure 4.5 Tighten Mounting Clamps4.3Installing the Camera to the Recess Mount Figure 4.7 Attach Camera to Recess Mount 12 en Installing a Recessed MountIP200 MiniDome In-CeilingMount IP200 MiniDome In-CeilingMount Installing a Recessed Mount enInstallation Manual Figure 4.8 Align Trim RingIP200 MiniDome In-CeilingMount 5Connection14 en Connection Page Bosch Security Systems