![12 en Installing a Recessed Mount](/images/new-backgrounds/43502/4350223x1.webp)
12 en Installing a Recessed Mount | IP200 MiniDome |
|
|
to the mount using the M4 x 15 mm mounting screws. Ensure that the cable is aligned with the cutout in the recess mount.
4.Attach the camera base, and then install the upper housing/bubble. (See the camera User Manual for details.)
Figure 4.7 Attach Camera to Recess Mount
NOTICE!
The recessed mounting bracket is provided with an additional safety tether point. To prevent injury, attach a safety wire from a secure anchor point above the ceiling to this tether point.
5.Align the two mounting screws attached to the trim ring with the two mounting holes in the recess mount.
Installation Manual | Bosch Security Systems |