74 en Recording | Camera Browser Interface |
|
|
10.2.3Alarm recording
Select a period for the
Select a period for the
Alarm stream
Select the stream to be used for alarm recordings:
–Stream 1
–Stream 2
–
Check the encoding interval and bit rates from profile: box and select an encoder profile to set the associated encoding interval for alarm recording.
Check the Export to account box to send standard H.264 files to the target whose address is displayed.
If an target has not yet been defined, click Configure accounts to jump to the Accounts page where the server information can be entered.
Alarm triggers
Select the alarm type that is to trigger an alarm recording:
–Alarm input
–Analysis alarm
–Video loss alarm
Select the Virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm scripts, for example.
10.3Retention Time
Recordings are overwritten when the retention time entered here has expired.
Enter the required retention time in hours or days for each
recording track.
Make sure that the retention time does not exceed the available recording capacity.
Software manual | Bosch Security Systems |