Bosch Appliances PLE-1MA060-US, PLE-1MA120-US Connecting speakers, Constant voltage loudspeakers

Plena Mixer Amplifier Installation and User Instructions Connections and settings

en 23

4.2.4 Connecting speakers 4.2.4.2 Low impedance loudspeakers

4.2.4.1Constant voltage loudspeakers

figure 4.8: Connecting speakers

figure 4.7: Connecting speakers

The mixer amplifier can drive 70 V constant voltage loudspeakers.

Connect the loudspeakers in parallel and check the loudspeaker polarity for in-phase connection. The summed loudspeaker power should not exceed the rated amplifier output power.

You can use the Call Only output for 3-wire remote volume control override. You can also use this output as an extra zone where announcements can be heard, but not music.

Connect low impedance loudspeakers to the 4 Ohm/0 terminals. This output can deliver the rated output power into an 4 Ohm load. Connect multiple loudspeakers in a series/parallel-arrangement to make the combined impedance 4 Ohm or higher. Check the loudspeaker polarity for in-phase connection.

Bosch Security Systems 2007-12 PLE-1MA030-US, PLE-1MA060-US, PLE-1MA120-US en